Surfaces
Wall & ceiling panels
The base material for everything else we make. A 100% PET board that can be cut, milled, thermoformed, printed and wrapped — and that absorbs sound while doing it.
Overview
Flat, V-groove, 3D, engraved and digitally printed PET panels for walls, ceilings and joinery.
GREENISH board is needled recycled polyester, thermally bonded — no glue and no formaldehyde binders; flame retardancy is built into the fibre before spinning. It is homogeneous, so a cut edge looks like the face, and it can be sanded, routed and re-finished on site.
The range covers flat panels for walls and ceilings, V-groove and shadow-gap profiles, 3D thermoformed tiles, CNC-engraved patterns and direct-printed surfaces. Panels can be fixed with adhesive, concealed clips, magnetic systems or a timber batten grid, depending on the substrate and the acoustic build-up required.
- One material, many surfaces. Flat, grooved, 3D, engraved or printed from the same recyclable board.
- Homogeneous colour. Dyed through, so cut edges and scratches do not reveal a white core.
- Machinable on site. Can be cut with a knife or saw and sanded; no edge banding needed.
- Printed without plastic film. Water-based inks penetrate the fibre, so the surface stays breathable and recyclable.
- Sheet sizes for the layout. 1220 × 2440 mm and 1225 × 2800 mm, 3–24 mm thick, 600–3600 g/m².
- Four ways to fix. Adhesive, concealed clips, magnetic systems or a timber batten grid.
| Material | 100% PET fibre (minimum 60% post-consumer recycled) |
|---|---|
| Sheet size | 1220 × 2440 mm · 1225 × 2800 mm |
| Thickness | 3–24 mm · 9 / 12 / 24 mm standard |
| Weight | 600–3600 g/m² depending on thickness |
| Sound absorption | NRC 0.85 at 12 mm (ISO 354) · 0 / 50 / 150 mm from wall |
| Reaction to fire | EN 13501-1 Class B · ASTM E84 Class A |
| Indoor air | GREENGUARD Gold · OEKO-TEX Standard 100, Class I |
| Substances | REACH 234 SVHC screened · RoHS 10 compliant |
| Colours | 46 standard (GP references) · 38 fire-rated · custom dyeing |
| Finishes | Flat · V-groove · engraving · print · felt composite |
| Range codes | GRS-V · GRS-BL · GRS-FE · GRS-SC · GRS-PH |
Values are typical for standard production. Project-specific data, test reports and declarations are issued with the quotation.
Details
What makes it work.
One material, many surfaces
Flat, grooved, 3D, engraved or printed from the same recyclable board.
Homogeneous colour
Dyed through, so cut edges and scratches do not reveal a white core.
Machinable on site
Can be cut with a knife or saw and sanded; no edge banding needed.
Printed without plastic film
Water-based inks penetrate the fibre, so the surface stays breathable and recyclable.
Sheet sizes for the layout
1220 × 2440 mm and 1225 × 2800 mm, 3–24 mm thick, 600–3600 g/m².
Four ways to fix
Adhesive, concealed clips, magnetic systems or a timber batten grid.
In situ
undefined in use.
Options
Standard, then adjusted to the project.
Everything below is made to order in our plant. None of it is a catalogue variant with a lead time attached — it is a production instruction.
- V-groove and shadow-gap profiles — no MOQ, cut to order
- 3D thermoformed tiles and fins
- CNC-engraved patterns from our library or yours
- Digital print with water-based inks
- Felt-faced composite for upholstered walls
- Polished panels with a smoother face
- Felt composite GRS-FE-001–006
- Bespoke CNC profiles and matching trims
Typical applications
Questions
Asked before specifying.
Can panels be used in wet areas?
What is the recycled content?
How do I cut and fix panels?
Also in the range
